Rollingbay: There's a Water Stain on My Ceiling and Nothing Is Above It

Why this happens in Rollingbay

The most common cause we find in Rollingbay is a supply line leaking in a wall or joist bay. Copper pinholed at a nail plate or a hanger, a cracked polybutylene fitting, a galvanized thread rusted through. On sloped waterfront on Murden Cove with slopes above Rolling Bay underneath, that's where we look first.

We also check condensation on a cold line or duct, because in Rollingbay it explains a real share of water stain on ceiling calls. Shows in humid weather or near an uninsulated cold pipe.

Don't overlook roof, flashing or window. Appears with rain and dries between storms. On Rollingbay properties from 1960s-to-1990s acreage homes and older beach cabins it comes up more than you'd think.

Before you call

Rolling Bay is on community systems and wells, so a locate may start at a shared meter vault, an individual meter or a pressure tank.

Before we arrive in Rollingbay, three things you can do: do the meter test with every fixture closed. Don't cut the ceiling at the stain; the leak is usually elsewhere. Feel the stain: warm means a hot line. None of it requires tools, and all of it helps us open and repair faster on interior acreage off Sunrise Drive.

What happens next

Fixing water stain on ceiling here usually ends with interior water leak detection near Rolling Bay: open and repair with pin and pinless moisture, mark on beach lots at Manitou Beach, isolate hot and cold. One crew, one visit, clay that shifts rigid pipe put back the way it was.

We've handled water stain on ceiling near Skiff Point where the cause was long poly runs down private drives, and near Bay Hay and Feed where Bainbridge clay on the Murden Cove slopes was hiding a drain failure. About forty minutes via the Agate Pass Bridge; we schedule Rollingbay so you aren't waiting a whole day.