Meter moving with everything off in Hansville, WA

The likely causes here

The most common cause we find in Hansville is a buried service line leak. The indicator keeps moving with the house isolated and irrigation isolated. On acreage off Hansville Road with trenches that fill as they're dug underneath, that's where we look first.

We also check a fixture in the house, because in Hansville it explains a real share of meter moving with everything off calls. The indicator stops when the house shutoff is closed.

Finally, a hose bib or outbuilding line. A shop, barn or hydrant branch that tees off before the house shutoff. Worth five minutes before anyone digs till and roots on the Hansville Road uplands.

What to check first

On the Hansville Road uplands the runs are long and wooded and the correlator does the narrowing.

Before we arrive in Hansville, three things you can do: close the house main shutoff and watch again. Isolate irrigation and any outbuilding branches. Time the meter over an hour to get gallons per hour. None of it requires tools, and all of it helps us trace the line faster on the Driftwood Key lagoon community.

The fix in Hansville

Fixing meter moving with everything off here usually ends with underground water leak detection near Buck Lake: trace the line with pipe and cable locator, correlate on Point No Point and Twin Spits cabin lots, repair, if you want us to. One crew, one visit, beach sand right at the water table put back the way it was.

We've handled meter moving with everything off near Driftwood Key where the cause was shallow lines under 1950s cabins, and near Norwegian Point where gravel at Point No Point was hiding a drain failure. About forty minutes to the north tip; we schedule Hansville so you aren't waiting a whole day.